Removing Antifoul Without Sandblasting using Peak Marine Antifoul Remover
Removing old antifoul can be a difficult and time-consuming task, especially if you're dealing with multiple layers of stubborn coatings.
Traditional methods, such as sandblasting, can damage the hull's gelcoat, fibreglass, or wood, and often leave behind residue. Fortunately, Peak Marine Antifoul Remover offers an efficient, safe, and eco-friendly solution for this challenging task.
Our advanced formula is designed to break down multiple layers of antifoul coatings in a single application without harming the underlying surface.
VOC and solvent free. Fully biodegradable formula.
To purchase, click HERE
Why Choose Peak Marine Antifoul Remover?
- Effective and Powerful: This formula dissolves multiple layers of antifoul in just one application, saving you time and effort.
- Safe on Various Surfaces: Safe for fiberglass, gelcoat, steel, and wooden boat hulls. It’s also compatible with epoxy coatings, ensuring no damage to your boat’s surface.
- No Sandblasting Required: Say goodbye to traditional sandblasting methods, which can damage your gelcoat or underlying materials. Our product is designed to safely remove antifoul without the need for abrasive methods.
- Biodegradable and Non-Flammable: Peak Marine Antifoul Remover is fully biodegradable, non-flammable, and contains no harmful VOCs or solvents. This makes it an environmentally friendly choice for boat maintenance.
- Australian Made: Proudly formulated and manufactured in Australia, Peak Marine Antifoul Remover meets the highest standards of quality and reliability.
How to Use Peak Marine Antifoul Remover
Removing antifoul with Peak Marine Antifoul Remover is simple and effective. Just follow these steps for a clean, smooth hull free from old antifoul.
Step 1: Apply Peak Marine Antifoul Remover
Wear gloves and protective eyewear. Read safety directions before use.
- Using an Airless Sprayer: Use an airless sprayer with chemical-resistant fittings. Do not atomize the product. Spray directly onto the clean hull, ensuring that the antifoul coating is thoroughly covered.
- Brush Application: If you don’t have an airless sprayer, you can also use a brush to apply the product evenly across the surface.
Step 2: Cover with Plastic Wrap
Once the remover has been applied, cover the treated areas with plastic film. This helps to keep the product in contact with the antifoul coating, allowing it to break down effectively. Leave the film in place for 12 to 24 hours, checking periodically for signs of the antifoul coating breaking down.
Step 3: Remove the Antifoul Coating
After the treatment time has passed, you’re ready to remove the antifoul coating. There are two options for this:
- Pressure Washing: Using a pressure washer at a slight angle will help lift the antifoul off the boat hull. Our Antifoul Remover will have softened the antifoul, making it easier to wash away.
- Scraping: For any remaining areas, scraping can be effective in removing the coating.
Step 4: Repeat if Necessary
If there are still traces of the antifoul coating or if multiple layers of antifoul are present, you may need to repeat the process. Apply Peak Marine Antifoul Remover once more, cover with film, allow it to sit, and then rinse or scrape again.
Coverage
A 1-litre bottle of Peak Marine Antifoul Remover covers approximately 4 square metres of hull area.
Purchase
CLICK HERE to purchase our Antifoul Remover online, or shop in-store at one of our stockits
Conclusion
Removing antifoul from your boat doesn’t have to be a hassle. With Peak Marine Antifoul Remover, you can break down multiple layers of antifoul coatings quickly and safely, without worrying about damaging your boat’s surface. Our biodegradable, non-flammable, and solvent-free formula offers a safer, more eco-friendly alternative to traditional sanding and blasting methods. Plus, it’s safe for all types of hulls, from fibreglass to wood, making it a versatile and reliable solution for boat owners everywhere.
Ready to remove that old antifoul and give your boat a fresh start? Try Peak Marine Antifoul Remover today and see the difference!